This Sugar Syrup Mixing Tank is designed for the manufacturing of Sugar and Liquid Glucose syrup. It comes with a drive motor anchor agitator system to manufacture consistent & high-quality syrup. It is arranged with steam jacket along with a third layer rock wool insulation & SS Cladding to conserve temperature.

Sugar Syrup Preparation system consists of a s.s. Preparation tank with heating arrangement. The heating can be provided in 3 options. 1) Electrical. 2) Thermic fluid. 3) Steam heating. The system is very simple to operate. Once the operator starts the panel in auto mode required quantity of water will be automatically filled in the Preparation tank. The quantity of water in metered by a flow meter which is connected to the Plc. The Plc then on sensing the water quantity starts the heaters. When the temperature rises to 95deg. C. the buzzer will alert the operator and the display shows ADD SUGAR. The stirrer is also starded before charging the sugar. Sugar can be charged just by pressing a button which gives command to Sugar handling system. Also we can manually charge the sugar. When the temperature reaches 105 deg. C once again the buzzer will alert the operator and the display shows ADD ACID. Acid is added manually. The heaters will stop and SYRUP READY is displayed. The syrup can be cooled by passing the syrup through heat exchanger or by natural cooling. The syrup is then stored in the storage tanks. Advantages: Clean and hygienic environment. Increased productivity. Sugar syrup is ready all the time Consistent product quality achieved

Sugar Syrup Mixing Tank

This Sugar Syrup Mixing Tank is designed for the manufacturing of Sugar and Liquid Glucose syrup. It comes with a drive motor anchor agitator system to manufacture consistent & high-quality syrup. It is arranged with steam jacket along with a third layer rock wool insulation & SS Cladding to conserve temperature

• ro Storage / Blending / Dispensing / Standardization / Sugar Syrup Preparation.
• Suitable collect, store, dispense and blend liquids like pulp, juice, beverage, sugar syrup. can be fitted with stirrer or blending device, temperature indicator, liquid level indicator and CIP spraying head.
• Tanks can be fabricated in SS 304 / 316 in single / double / tripal layer with or without steam jacket insulation.
• The tanks are welded with smooth inner walls and are finished upto 150 grit finish and are hydraulic tested.
• Available in capacities from 100-L – 15-KL interconnected with centrifugal / screw pumps.